Whole-House Surge Protection for Florida Homes
Florida gets a lot of lightning. The National Weather Service office in Melbourne says central Florida is the "Lightning Capital" of the United States, and that Florida has the highest number of lightning casualties of all 50 states. [1]
A plug-in power strip protects what is plugged into it. It does not protect the whole house. A whole-house surge protective device (SPD), wired in at the service equipment, protects the home as a whole. This is a guide for homeowners, not a design manual. A licensed electrician should choose and install a listed device.
Morningstar Electric LLC, Lic# EC13005732, is an electrical contractor based in the Tampa Bay area with a second office in Big Pine Key. We install whole-house surge protection.
What a surge protector does
A surge is a short spike in voltage. Lightning is one cause, but not the only one. UL 1449, the safety standard for surge protective devices, covers devices designed for repeated limiting of transient voltage surges. [2] In plain words, a listed SPD is built to clip surges again and again, not just once. Ask for a UL listed device.
Type 1, Type 2 and Type 3, in plain language
NFPA explains the types this way: [3]
Type 3 devices are plug-in surge protectors you use for things like computers and TVs. They protect only what is plugged into them.
Type 1 and Type 2 devices are hard-wired. These are the whole-house devices that go at or next to the service equipment.
NFPA also points out what plug-in strips leave out. Hard-wired smoke alarms and carbon monoxide detectors have electronics that a surge can damage, and you might not notice until they fail. The same goes for GFCI and AFCI devices and security systems. [3]
What the code says
Section 230.67 of the 2020 National Electrical Code (NEC) requires all homes to have a Type 1 or Type 2 SPD as part of the service equipment or right next to it. It applies to new services and to service upgrades. [3]
Florida's current code is the Florida Building Code, 8th Edition (2023), which took effect December 31, 2023 [4]. It is based on the 2020 NEC. [5] Your building department enforces the code in force when the permit is pulled, so we always check before we start.
What that means for you:
If you are building a new home, or replacing the service or main panel, a whole-house SPD is part of doing the job to code.
If your panel is staying and the service is not being replaced, you may not be required to add one. It is still a smart upgrade in a state with this much lightning.
Layers work better than one strip
A listed Type 1 or Type 2 SPD at the service or main panel. This is the whole-house layer, and it is what we install.
Plug-in surge protectors on your most sensitive or expensive electronics, if you want a second layer.
A panel in good shape. A rusty, failing or crowded panel is its own problem. If we see that during a visit, we will tell you. See our panel upgrade service.
NFPA notes that many national insurance groups recommend surge protection at the service equipment. [3] Ask your own insurance agent what your policy says.
Good times to add one
During a panel replacement or service upgrade, when the code already calls for it
When you add an EV charger or battery backup, so new equipment is protected from day one
Before storm season. See our storm prep page.
What it will not do
A whole-house SPD does not make a house "lightning proof." It will not:
Replace GFCI or AFCI protection, which guard against shock and arcing
Fix low voltage or a loose service connection, which need their own diagnosis
Last forever. If your device has a status light, check it now and then, and call us if it shows a problem.
Call for a quote
We can look at your panel, recommend a listed Type 1 or Type 2 device, and install it with the required permit.
TAMPA BAY: 813-892-4582
LOWER KEYS: 305-897-1698
Morningstar Electric LLC, Lic# EC13005732. Planning a panel upgrade or an EV charger too? Tell us when you call. It is often cleaner to do both in one visit.
Sources
National Weather Service Melbourne, Lightning Information Center
NFPA, Changes to the 2020 NEC That Impact How We Install Residential Electrical Services (2021)
Florida Building Commission, Florida Building Code Effective Dates
ICC, Significant Changes to the Florida Building Code 2023 Edition (sample pages)



Comments